AFUE

Annualized Fuel Utilization Efficiency is a measure of your furnace’s heating efficiency. The higher the AFUE percentage, the more efficient the furnace. The minimum percentage established by the DOE for furnaces is 81%.

Air Handler/Coil Blower

The indoor part of an air conditioner or heat pump that moves cooled or heated air throughout the ductwork of your building. An air handler is usually a furnace or a blower coil.

BTU

A British thermal unit is a unit of heat energy. One Btu is the amount of heat required to raise one pound of water by one degree Fahrenheit. The higher the Btu rating, the greater the heating capacity of the system.

CAE

The Combined Annual Efficiency is a measure of the amount of heat produced for every dollar of fuel consumed for both home and water heating.

CFM

Stands for Cubic Feet per Minute. This measurement indicates how many cubic feet of air pass by a stationary point in one minute. The higher the number, the more air is being moved through the ductwork by the system.

Composite Fan Blades

Used in select outdoor air conditioner or heat pump units, blades are manufactured with rugged materials and an exclusive angled design that improve operation and durability, even in the harshest environments.

Condenser Coil

The outdoor portion of an air conditioner or heat pump that either releases, depending on the time of the year.

Damper

A movable plate, located in the ductwork, which regulates airflow. Dampers are used to direct air to the areas that need it most. Typically used in a zoning application.

Dual Fuel

A comfort system that pairs an electric heat pump with a gas furnace, providing an energy-efficient alternative to the conventional furnace/air conditioner combination.

Ductwork

The method by which air is channeled from the furnace or the blower coil throughout your building.

Evaporator Coil

The part of the air conditioner or heat pump that is located inside the air handler or attached to the furnace. Its primary function is to absorb the heat from the air in your building.

Heat Exchanger

Located in the furnace, the heat exchanger transfers heat to the surrounding air, which is then pumped throughout the building.

Heat Pump

A heat pump is an HVAC unit that heats or cools by moving heat. During the winter, a heat pump draws heat from outdoor air and circulates it through your building’s air ducts. In the summer, it reverses the process and removes heat from your building and releases it outdoors.

HSPF

The Heating Seasonal Performance Factor is the heating efficiency rating for heat pumps. The higher the rating, the more efficient the heat pump. HSPF will be regulated in 2006 at 7.7.

HVAC

Heating, Ventilation and Air Conditioning.

Programmable Thermostat

A thermostat with the ability to record different temperature/time settings for your heating and/or cooling equipment.

Single Package

A heating and cooling system contained in one outdoor unit.

Split System

An HVAC system in which some components are located inside the structure of the building and some are located outside. Split systems should be matched for optimal efficiency.

Thermidistat

Monitors temperature and humidity and adjusts heating or cooling system to maintain desired levels.

Thermostat

Usually found on an inside wall, this device operates as a control to regulate your heating and cooling equipment, allowing you to adjust your home comfort at the touch of a switch.

Upflow

When an air handler or furnace is installed in an upright position and circulates air through the side or bottom and out through the top. Typically used in basement, closet and attic installations.

Variable Speed Motor

A motor that automatically adjusts the flow of warm or cool air for ultimate comfort and efficiency.